Tuesday January 8th, 2008 @ 2:11 PM
Hello,
I am thinking about getting my inner labia peirced, but i do not like the look of rings. i was wondering if labret studs as jewelry would be a viable option.
thanks
There is no reason this type of jewelry couldn’t be done. The shaft of the jewelry will need to be long enough to accommodate some initial swelling, and the ball and disk on the end of the shaft will have to be large enough to prevent them from pulling through the piercings. If those factors are accounted for, it shouldn’t be an issue.
0 / 4 votes 
Loading ...
Posted by Derek Lowe | Permalink | Comments
Tuesday January 8th, 2008 @ 2:05 PM
Hi.
I’m planning on getting my hip pierced on Saturday, but I really can’t find out much about them on the internet. I need to know the age restrictions for the UK and the pros and cons on getting one done. Some people are telling me that it DEFINATELY will reject, but others are saying if the piercer is reputable and qualified enough, there should be no problem.
Thanks ?
Unfortunately, I can’t help you with the age restrictions in the UK. However, I’m sure a phone call to any of your local piercing establishments should get you that information pretty quickly.
As for hip piercings…Any time you get a surface piercing done, you need to accept the fact that rejection is a very real possibility. Surface piercings in certain parts of the body work better than on other parts. Certain types of jewelry work better in certain area. Certain piercing techniques may prove more successful than others, depending upon the area of the body.
However, even if everything is “ideal” there is no guarantee that your piercings won’t reject…regardless of “reputable and qualified” the piercer is. Obviously, the more experience they have, the better the quality of jewelry they are using etc etc…the better the chances of success. But again…there are no guarantees with surface piercings (with any piercing, really).
Hip piercings can be challenging to heal, because of the amount of movement that occurs in that part of the body as well as friction and irritation that can occur from clothing rubbing on the piercings. You and your piercer will have to determine the placement that is most-likely to work out for you.
Best of luck!
+2 / 2 votes 
Loading ...
Posted by Derek Lowe | Permalink | 10 Comments
Tuesday January 8th, 2008 @ 1:58 PM
I recently split from my ex-fiance and decided that since I had to remove most of my facial piercings for one reason or another while we were together, that I’d get a new one to mark my new life and independence.
I settled on getting my bridge done. With years between piercings that I mentioned, I was sort of at a loss as to where to go. I did some cursory checking on BME and saw that the few (straight) bridges that I could find on the search were done by this one particular piercer, so I decided to try him out.
It’s crooked. I was super-nervous at the time that I was getting it, and I thought that the marks might have been a bit off, but I wasn’t completely sure… I preferred to defer to the piercer’s knowledge of where to place it on my admittedly not-so-symmetrical bridge… So I went ahead with it. Turns out that the marks were indeed off (left side lower than the right by about a millimetre), and that one side is placed deeper than the other, as well, which I didn’t initally notice, my friend did after I got back from it being done.
I want this to be right so badly. Is it reasonable to ask the piercer to redo the piercing? After some stories that I got wind of after I got this done, I’m not completely sure that I want to head back there, anyway… I got the piercing on Friday. How long after removing it do I wait before getting it redone?
Piercings do sometimes come out crooked or off center or less-than-ideal. Piercers are, after-all, human and not machines. In general, bridge piercings can be very challenging to get perfect…not trying to make excuses for anyone, just stating the facts.
However, regardless of the piercing, if it doesn’t come out the way it should, a “good” piercer will be willing to re-do it for you at no charge. Even if the marks were off initially, if the piercer thought everything seemed all-good, then they should be willing to re-do the piercing so it’s correct.
As for whether you choose to go back to that piercer, that will will have to be your decision. I’m not sure what other kinds of stories you’ve heard since having your initial piercing done, but I would encourage you not to let a crooked bridge piercing put a piercer in the “no good” category.
As for how long to wait…I would suggest 2-3 weeks, assuming you remove the piercing within a week or so of having the piercing.
Best of luck with your next go at the bridge piercing. And, next time, if you aren’t 100% confident in the marks, don’t proceed with the piercing.
If a piercing does come out not the way you want it,
+1 / 1 votes
Loading ...
Posted by Derek Lowe | Permalink | 1 Comment
Sunday January 6th, 2008 @ 10:43 AM
Filed under: Nipple
I’m looking for high quality, internally threaded, black titanium barbells for my vertical nipple piercings (10g).
Any suggestions?
Anatometal make black niobium barbells in whatever size you fancy - I’d contact Ryan from BMEshop and get him to organise some for you, if your local piercer doesn’t carry Anatometal.
0 / 0 votes
Loading ...
Posted by Lori St.Leone | Permalink | 1 Comment
Saturday January 5th, 2008 @ 11:49 PM
Do you think that large gauge genital piercings (amp or app) should be done by scalpelling or have you used a dermal punch? I mean 3mm jewelry or sizes in that range. There was once a school of thought that scalpelling healed faster than smaller gauge and stretching.
I’m very familiar with dermal punches but I have never used one for an amp.
If this wasn’t BME I’d say “who want’s less penis tissue?”, but this is BME and there are plenty of people here who would or have happily chopped off the whole package. But I digress, there is NO advantage to using a dermal punch and the risk of damaging the corpus cavernosum is greatly increased. For a large gauge piercing a scalpel is ideal as it neither removes tissue (like a punch) or damages tissue outside of the center line (like a needle). However, at 3mm a needle is just fine.
0 / 0 votes
Loading ...
Posted by Sean Philips | Permalink | Comments
Saturday January 5th, 2008 @ 2:21 PM
Filed under: Ear
I had my cartilage pierced several years ago, maybe a decade, with a gun… I had to take it out a few years ago and ever since I’ve really wanted to get it pierced again. This time though I was thinking of getting it dermal punched, to remove the original hole, and I’ve heard that on some level it’s better to get cartilage dermal punched as opposed to piercing with a needle or otherwise. I don’t want to get too big only 12 or 10 gauge.
I have inquired at a few local shops and have been told that typically they would pierce at such a small gauge. Is it possible or even recommended to get a dermal punch that small?
It’s absolutely possible to get dermal punches as small as 1.5mm (which is about 14ga), and I’m a long-time advocate of punching over piercing, it heals so much more quickly and easily! You might have to cast your net a bit wider, but I’m sure you can find a good piercer to help you out with what you want if you keep looking. 
+1 / 1 votes
Loading ...
Posted by Lori St.Leone | Permalink | 3 Comments
Saturday January 5th, 2008 @ 1:46 PM
I recently discovered the wonders of Emu Oil which I use on all my piercings and it works great with clearing up oozies, redness and overall healing. The instructions tell you to apply to piercings and tattoos 3 - 4 times a day, but I was wondering if there is any harm in applying emu oil to a cotton ball then bandaging it over the piercing over night? I’ve done this for the last several nights on my new surface piercings and they look great with no redness or crusties, but I don’t want to cause them harm unknowingly.
Your piercings need to be able to ‘breathe’ and drain any lymph, keeping them covered and saturated with oil is not ideal. Emu oil is popular and many people find it effective on healing or troublesome piercings, but I would apply it sparingly - less is often more with these things!
+3 / 3 votes
Loading ...
Posted by Lori St.Leone | Permalink | Comments
Saturday January 5th, 2008 @ 1:42 PM
Filed under: Nose
Ok, so I just got my nostril pierced a few days ago, and the only aftercare I was told was to spray the outside with some H2Ocean and then just leave it alone. The outside is nice and clean, but I’m guessing there is some gunky stuff on the inside that probably shouldn’t be there…
What should I be doing to keep this as clean as possible? I would just sea-salt soak it, but I was told not to “dunk” it in water for a few weeks.
I tell my clients to mix up a sea salt solution in a clean glass, stick their nose in the glass, and blow bubbles. After soaking, blow your nose gently with your fingers on either side of the stud (not pressing directly on it) and clean the inside with the salt water and a cotton bud/q-tip. H2Ocean’s fine if that’s what you want to use, but you do need to clean the inside of the nostril as well!
+4 / 4 votes
Loading ...
Posted by Lori St.Leone | Permalink | 2 Comments
Friday January 4th, 2008 @ 11:44 AM
Filed under: Nipple
I am interested in nipple pumping with snake bite kits. My nipples are pierced. Should I still use the snakebites with the jewelry inserted or take them out and then put back in after the sessions? Are the risks of rejection greater with piercings or without?
Please don’t publish my identifying infor. Thanks so much for all of your help.
For the best chance of not damaging the piercing I’d say remove them. Otherwise experiment a bit, pump with out them in, then with them in another day. If t hurts more after pumping with the rings, it is likely causing some damage.
Sean
0 / 0 votes
Loading ...
Posted by Sean Philips | Permalink | Comments
Monday December 31st, 2007 @ 11:33 AM
Filed under: Nipple
Hi there, I have my right nipple pierced and it has a 14 gage ring in it. I have had it a little over a year now and it healed fine. However I am constantly getting this fluid that is drying/crusting to my ring. But the smell is aweful…and i clean it but like 2 hours later it will have a fowl smell again. It is not infected at all. What is making it smell like that?
This has been explained before, but since it’s Ask BME now rather than QOD, I assume it’s worth re-answering. All of the skin on your body sheds skin and oils, normally this stuff sloffs off during the day and/or comes off in the shower. Inside the healed fistula of a piercing, the tissue does the same thing, but rather than easily coming off it rots and becomes rather gross (like ear funk). The jewelry you wear may be reacting with your skin and making this situation worse. One thing that makes a HUGE difference is the material used. I would recommend titanium or glass to minimize this discharge. Another option is organics, there porosity helps absorb some of this funk, but if your like me, you may not like the aesthetics of organics in a nipple piercing, so just stick with ti or glass.
0 / 0 votes
Loading ...
Posted by Sean Philips | Permalink | 13 Comments
